1 pound bag of popcorn mushroom substrate

How to Use Popcorn Mushroom Substrate Grain Bag - 1lb

How to Use Popcorn Mushroom Substrate Grain Bag - 1lb

Preparing Your Workspace

Before using the Popcorn Mushroom Substrate Grain Bag - 1lb, it’s essential to set up a clean and sanitized environment to reduce the risk of contamination. A laminar flow hood or still air box is ideal, but you can still minimize contamination by following these steps:

  • Disinfect your work area with rubbing alcohol or another sanitizer to eliminate dust and contaminants.
  • Avoid working in areas with airflow from fans, air conditioners, or heaters, as these can introduce airborne particles.
  • Wipe down the outside of the substrate bag with rubbing alcohol to ensure a sterile surface before handling.
  • Sanitize your hands and any tools, such as scissors or syringes, before working with the substrate.

Maintaining a clean environment is key to successful inoculation. If you don’t have a laminar flow hood, consider using a still air box to limit airborne contamination during the inoculation process.

Inflating the Substrate Bag

Before inoculating the Popcorn Mushroom Substrate Grain Bag, slightly inflate the bag to ensure proper gas exchange through the 5-micron filter patch. This helps support healthy mycelial growth during colonization. Here’s how to do it:

  • Grasp the opposite gussets of the bag and gently pull them apart to allow air to enter through the filter patch.
  • Repeat this process until the bag is slightly inflated and ready for inoculation.

Inoculating the Popcorn Substrate Bag

1. Sterilize the Syringe Needle

Flame sterilize the syringe needle by holding it over a flame until it turns red hot. Allow the needle to cool for about 30 seconds to 1 minute before inoculating the substrate. This process helps prevent contamination.

2. Inject the Spawn or Spores

Insert the cooled needle into the self-healing injection port on the substrate bag. Inject 4-6cc of spore solution or liquid culture into the substrate. Distribute the liquid evenly to promote uniform colonization throughout the grains.

3. Mix the Substrate

After inoculating, gently massage the bag to help distribute the liquid culture evenly across the popcorn grains. This promotes even mycelial colonization and faster growth.

Incubating the Popcorn Substrate Bag

Once inoculated, place the substrate bag in an upright position in a room-temperature environment between 65-75°F. Keep the bag away from direct sunlight and temperature fluctuations. You can incubate the bag at temperatures up to 80°F, but avoid exceeding this temperature to prevent stalling the mycelium’s growth.

Make sure the 5-micron filter patch is unobstructed to allow proper gas exchange during colonization. You should begin to see mycelial growth within 10-14 days, with full colonization typically taking 3-4 weeks when using spores. Liquid culture generally shortens colonization time by about a week.

Using the Substrate for Spawn

Once the popcorn substrate is fully colonized, it’s ready to be used as spawn for a secondary substrate. Grain spawn is not intended for direct fruiting but rather for inoculating a nutrient-rich bulk substrate, such as manure or wood. Here’s how to proceed:

  • Transferring to a Secondary Substrate: Gently break up the fully colonized popcorn grains by massaging the bag to loosen the mycelium. Once prepared, the spawn can be mixed into the secondary substrate to produce larger flushes of mushrooms.
  • For optimal results, use 1 pound of spawn to inoculate up to 5 pounds of secondary substrate. This ensures even colonization and efficient mushroom growth.

Monitoring for Contamination

Although the Popcorn Mushroom Substrate Bag is fully hydrated and sterilized, contamination can still occur if cleanliness isn’t maintained. Watch for unusual colors, slime, or foul odors, as these are signs of contamination. If contamination occurs, discard the substrate and sanitize your workspace before starting a new batch.

Maximizing Spawn Efficiency

To ensure your grain spawn fully colonizes and is ready for transfer to a secondary substrate, make sure the filter patch remains unobstructed to allow for proper gas exchange during colonization. Maintaining consistent temperatures and a clean environment is key to ensuring healthy spawn.

Once the grain spawn is fully colonized, transferring it to a nutrient-rich bulk substrate, such as manure or wood, will provide the necessary nutrients for producing large mushroom flushes. Using 1 pound of spawn to inoculate up to 5 pounds of secondary substrate ensures even colonization and healthy mushroom growth.

Conclusion

The Popcorn Mushroom Substrate Grain Bag - 1lb is a versatile and nutrient-rich medium for producing grain spawn. By following these steps, you’ll ensure successful colonization, allowing you to transfer the spawn to a secondary substrate for optimal mushroom growth. With proper care, you can enjoy large flushes of healthy mushrooms.

Click here to go to the product page.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.